When to Replace Your Heating System
While you may not have to run your heating system six months of the year, you want to make sure the system runs smoothly and efficiently for the rest of the year, especially right before the winter approaches. This is why your heating system is important to keep in good condition before the weather changes. Here are some of the most common issues and the best ways to address your heating system.
Heater Does Not Turn Off
If your heating system keeps running and blows hot air, it must first be verified that it is set to "auto" instead of "on." When your heating system is set to "auto" and still it goes off, you should call a professional.
Your thermostat possibly is broken or has incorrect wiring if the problem continues. It can also be a problem with the blower of your heating system. The first thing is to make sure of is that the cable is properly plugged in, then reset it to the manufacturer's configuration to see how the system is running. If it doesn't work, it may be necessary to replace your thermostat.
Two types of ignition systems are typically provided by modern heating systems – a surface ignition or an intermittent pilot. The ignition control on the furnace could be malfunctioning among several mechanical failures and cause intermittent or no heat in your home.
The airflow can be restricted by a blocked or dirty air filter which makes air that is detrimental to the indoor quality. Dirty blowers can also halt the switch and it controls the fan. This problem is easy to fix and then extend the life and efficiency of the appliance by changing the air filter quarterly.
Thermostat Not Working
If your temperature settings or system controls change, your thermostat could be having a problem again. Try to replace the batteries if you have a digital thermostat. If not, you can try to reset them to the configuration of the manufacturer again.
You can check whether there is a responsible tricked circuit if that does not solve this problem. Finally, you can look back at the cable, but the best way to recognize the problem is an experienced HVAC professional.
Heating Fan Not Working
If the ventilator of your heating system does not work, you should check first the thermostat to see if it is in the correct position. Check next to your air filter to make sure it's not dirty; it can stop your fan from working sometimes. Finally, check whether your circuit breakers are turned on, but if not, do not turn them on and off again, as this might create an electric fire. Contact a licensed professional for your HVAC in Shawnee, OK, if none of these troubleshooting methods work.
Mold Affected Heating System
The moisture build-up can be an issue, especially due to poor insulation or faulty ductwork, so that your home's heating system has moisture in it. If so, your heating system will get mold growth. The best way to clean your heating system is by an expert technician of HVAC in Shawnee, OK, like Comfort Control Specialists. Isolate your ducts correctly and clean them if needed to prevent moisture from collecting. As mentioned, changing your air filters every three months is also a good idea and cleaning up your air pipelines every few years professionally.
Higher Energy Bills
This is common if you have a heat pump. Although the cost of the gas energy in cold months is naturally higher, a sudden spike could result from minor problems such as an outdoor breaker or a dirty air filter. This could also be caused by moderate problems, such as an outdoor icing or coolant leak, or by severe complications like a damaged compressor.
Come to Comfort Control Specialists for your HVAC repair in Shawnee, OK. Whenever you need to replace the heating system or make a repair, make a call to us.